www.design-reuse-embedded.com
You are here : design-reuse-embedded.com  > Design Platform  > System Design Kit
Download Datasheet        Request More Info
All Silicon IP

Overview

The System Navigator probe is designed to support the special features and integrated peripherals of 8051 cores from several IP vendors. The System Navigator probes are available for the following cores and processors:
  • Cast 8051 cores -- Including CAST R8051XC, R80515, R8051, C8051
  • Handshake Solutions -- Including (Philips) HT80C51 and HT80C51MX clock-less microcontroller cores
  • Mentor M8051EW -- Including (Philips) HT80C51 and HT80C51MX clock-less microcontroller cores
  • NXP Semiconductors -- Including LPC952 microcontroller
Special silicon hooks for System-on-Chip (SoC) development have been integrated into the synthesizable IP model for the core. This OCI (On-Chip Instrumentation) logic provides a powerful debug tool with advanced features at a competitive price. MIPS System Navigator probe hardware is contained in a compact chassis that connects to the target system using a standard 10-pin debug connector. It requires access to only four pins in the core processor. The system runs on a Windows 7 (32-bit or 64-bit) or Windows XP (32-bit) PC over an USB 2.0 or optional 10/100 Ethernet port. A graphical, source-level debugger program provides an intuitive, easy to use interface. A software driver is included for use of the probe with the Keil Vision (UV3 or UV4) software debugger interface.

Features

  • Supports processors and cores including the CAST 8051, Mentor Graphics M8051EW, and processors from Handshake Solutions and NXP Semiconductors
  • Go, halt processor run control
  • Supports bank switching and address memory extensions if available from core vendor
  • Read-write all processor registers, SFRs, program memory and data memory
  • Unlimited software breakpoints
  • Hardware execution breakpoints up to 4, depending on configuration
  • Load binary, Hex or OMF51 file formats
  • Complex triggers monitor address and data for code memory, data memory and SFRs
  • Low-level access to JTAG functions for silicon verification
  • Single line assembler/disassembler
  • Trace window display of assembly, source or mixed assembly/source
  • Symbolic debug including code, variables, and variable types
  • Symbol Explorer provides hierarchical tree view of all symbols (modules, functions, blocks, variables and more)
  • Source window can display C, assembly and mixed source code
  • Source window provides execution control: go; halt; goto cursor; step over/into call
  • Set or clear software or hardware breakpoints in source window
  • Select global or local variables for watch window from the source window
  • Trigger window allows triggers to be set on a combination of address, data, and bus cycles
  • Triggers can be set on an address range and/or data with masking bits
  • Includes software driver for Keil Vision software debugger
  • Supports software tools from Keil, IAR and other vendors

Partner with us

Visit our new Partnership Portal for more information.

Submit your material

Submit hot news, product or article.

List your Products

Suppliers, list and add your products for free.

© 2018 Design And Reuse

All Rights Reserved.

No portion of this site may be copied, retransmitted,
reposted, duplicated or otherwise used without the
express written permission of Design And Reuse.