www.design-reuse-embedded.com
FDSOI IP
32 Solutions

1
12-bit 1MS/s Dual-Channel SAR ADC - Samsung 28nm FDSOI
The S3ADSIQ1M12BSS28FDSOIB is an ultra low power 12-bit Dual-Channel SAR ADC IP with a sampling rate up to 1MS/s. The ADC includes an input multiplexer with 12 analog inputs. The input signal samplin...

2
10-bit, 160MSPS, 1.8V Single Current Steering Video DAC in 28FDSOI
Synopsys offers a broad portfolio of high-quality Analog IP optimized for system-on-chip (SoC) integration in a variety of applications, including broadband communications, multimedia and embedded dat...

3
10-bit, 1MSPS, 1.8V SAR ADC with 16:1 Input Mux in 28FDSOI
Synopsys offers a broad portfolio of high-quality Analog IP optimized for system-on-chip (SoC) integration in a variety of applications, including broadband communications, multimedia and embedded dat...

4
12-bit, 1MSPS, 1.8V SAR ADC with 16:1 Input Mux in 28FDSOI
Synopsys offers a broad portfolio of high-quality Analog IP optimized for system-on-chip (SoC) integration in a variety of applications, including broadband communications, multimedia and embedded dat...

5
24-bit, 97dB Dynamic Range, 8 to 48kHz Sampling Rate Stereo Audio DAC in 28FDSOI
Synopsys offers a broad portfolio of high-quality Analog IP optimized for system-on-chip (SoC) integration in a variety of applications, including broadband communications, multimedia and embedded dat...

6
DDR3/2 PHY - ST 28FDSOI18
DDR3/2 PHY Cores are mixed-signal PHY IP Cores that supply the complete physical interface to JEDEC standard DDR3 and DDR2 SDRAM Memories.

7
GLOBALFOUNDRIES 22nm FDSOI 1.8v/0.8v PLL
This IP is a programmable Analog PLL suitable for high speed clock generation.

8
GLOBALFOUNDRIES 22nm FDSOI 1.8v/0.8v Power Regulator
The Power Regulator is to provide 0.8v power supplies which are regulated from the single 1.8v input supply. This IP does not need any external cap. The maximum output current is 50mA and the current ...

9
GLOBALFOUNDRIES 22nm FDSOI 3.3v RTC with 32768Hz Crystal Oscillator
This RTC IP is specifically designed for low power applications, including a 32768Hz crystal oscillator with embedded analog IOs, an embedded low power LDO and a RTC counter. The power supply is typic...

10
HDMI 1.4 TX PHY in 28nmFDSOI
Synopsys DesignWare® HDMI™ 1.4a Transmitter (TX) controller and PHY IP solution provides the necessary logic to implement and verify designs for various consumer electronic applications. Th...

11
HDMI 2.0 TX PHY in 28nmFDSOI
The Synopsys DesignWare® HDMI™ 2.0 RX IP solutions provide the necessary logic to implement and verify designs for various consumer electronic applications. The High-Definition Multimedia In...

12
LPDDR4 multiPHY - 28FDSOI18
LPDDR4 multiPHY is a complete physical interface solution for many different kinds of JEDEC -standard mobile and PC/consumer SDRAMs.

13
MIPI D-PHY Rx V1.1 1 Clock, 1 Data Lane, 1.5Gb/s in 28FDSOI
Compliant with the MIPI Alliance D-PHY Interface specification, v1.2

14
MIPI D-PHY Rx V1.1 1 Clock, 2 Data Lanes, 1.5Gb/s in 28FDSOI
Compliant with the MIPI Alliance D-PHY Interface specification, v1.2

15
MIPI D-PHY Rx V1.1 1 Clock, 4 Data Lanes, 1.5Gb/s in 28FDSOI
Compliant with the MIPI Alliance D-PHY Interface specification, v1.2

16
MIPI D-PHY Tx V1.1 1 Clock, 4 Data Lanes, 1.5 Gb/s in 28FDSOI
Compliant with the MIPI Alliance D-PHY Interface specification, v1.2

17
MIPI MPHY High Speed Gear 3, 6Gb/s in 28FDSOI
Synopsys DesignWare MIPI M-PHY IP is compliant to the MIPI Alliance M-PHY specification and supports a wide range of advanced CMOS digital logic processes. The fully integrated hard macro M-PHY is a ...

18
PCIe 2.0 PHY in 28FDSOI
The DesignWare PHY IP for PCI Express 2.0, operating at 5.0 Gbps, meets the demand for increased bandwidth and narrower interconnect links in the data center, storage and networking infrastructure app...

19
Samsung 28nm FDSOI 1.8v/1.0v APLL
This IP is a programmable Analog PLL suitable for high speed clock generation. The high speed VCO can run from 800MHz to 3200MHz. By setting DM [3:0] and DN [11:0] to different values according to dif...

20
SAMSUNG 28nm FDSOI USB2.0 Dual Role PHY/OTG PHY
The USB 2.0 OTG PHY is a Hi-Speed USB peripheral transceiver IP that implements the Intel® UTMI standard. It provides a High/Full-Speed USB analog front-end with a build-in 8-bit/16-bit parallel i...

21
SATA 6G PHY in 28FDSOI
Synopsys DesignWare® SATA PHY IP is designed for use in system-on-chip (SoC) solutions. The DesignWare SATA PHY IP integrates seamlessly with Synopsys DesignWare SATA Host & Device Controller IP...

22
ST28nm LVDS Transmitter
The LVDS transmitter is designed to support Single Link transmission between Host and Flat Panel Display with up to SXGA+ resolution and Dual Link transmission between Host and Flat Panel Display with...

23
USB 2.0 OTG PHY in 28FDSOI
The Synopsys DesignWare® USB 2.0 femtoPHY provides designers with a complete physical (PHY) layer IP solution for low-power mobile and consumer applications such as smartphones, tablets, digital T...

24
USB 2.0 OTG PHY, 2-port in 28FDSOI
The Synopsys DesignWare® USB 2.0 femtoPHY provides designers with a complete physical (PHY) layer IP solution for low-power mobile and consumer applications such as smartphones, tablets, digital T...

25
USB 3.0 PHY in 28FDSOI
The DesignWare® SuperSpeed USB IP complete solution is based on the USB 3.0 specification from the USB Implementers Forum and consists of the xHCI host and device controllers, PHY and verification...

26
XAUI 3G PHY in 28FDSOI
The DesignWare® XAUI PHY IP is designed for use in any networking or high-end computing SoC solutions. Designed for the latest high-speed backplanes, the XAUI PHY supports the 10 Gigabit Ethernet ...

27
MIPI D-PHY Receiver on FD-SOI
The MXL-DPHY-CSI2-RX is a high- frequency low-power, low-cost, source-synchronous, Physical Layer supporting the MIPI® Alliance Standard for D-PHY.

28
MIPI D-PHY Transmitter on FD-SOI
The MXL-DPHY-DSI-TX is a high-frequency low-power, low-cost, source-synchronous, Physical Layer supporting the MIPI® Alliance Standard for D-PHY. The IP can be configured as a MIPI Master optimi...

29
MIPI D-PHY/LVDS Combo Transmitter for Automotive on FD-SOI
The MXL-LVDS-DPHY-DSI-TX is a combo PHY that consists of a high-frequency low-power, low-cost, source-synchronous, Physical Layer supporting the MIPI Alliance Standard for D-PHY and a high performance 4-channel LVDS Serializer implemented using digital CMOS technology.

30
Silicon Proven Multimedia gateway Solution from Tier1 Company
The iD325 is next generation DOCSIS® 3.1 device for data gateway applications.

31
USB, Superspeed USB, MIPI, HDMI, Ethernet/IP, DisplayPort, PCI, DDR, SATA
A complete portfolio of wired connectivity IPs - controller and analogy PHY combinations, to meet your requirements, all silicon proven, many high volume mass production proven

32
I-fuse OTP technology
I-fuse™ is a fuse-based OTP technology that offers up to 100x reliability, 1/100 cell size, and 1/10 program current than the ubiquitous electrical fuse (e-fuse) technology

 Back

Partner with us

Visit our new Partnership Portal for more information.

Submit your material

Submit hot news, product or article.

List your Products

Suppliers, list and add your products for free.

© 2017 Design And Reuse

All Rights Reserved.

No portion of this site may be copied, retransmitted,
reposted, duplicated or otherwise used without the
express written permission of Design And Reuse.