www.design-reuse-embedded.com
31 "Wireless Solutions" Solutions

1
Arm Cordio-B50
The Arm Cordio-B50 is a Bluetooth 5 modem, protocol processing logic and link layer controller delivered as soft IP, with power intent and implementation IP, associated testbenches and link layer firmware. Cordio-B50 supports changes enabled by the Bluetooth 5 radio including the 2 Mbps mode, Long range, and advertising extensions.

2
Arm Cordio-B50 radio IP
The Arm Cordio-B50 radio IP is a complete self-contained radio subsystem supporting Bluetooth 5 protocol available at TSMC 55nm LP/ULP, TSMC 40nm LP/ULP and UMC 55nm ULP process nodes. The solution consists of the RF 2.4GHz transceiver, modem, protocol processing logic and link controller along with link layer firmware.

3
Arm Cordio-B50 stack
The Arm Cordio stack is designed specifically for Bluetooth low energy single-mode products catering to the power sensitive Internet of Things (IoT) market. With its small code size, easy-to-use APIs, and portable architecture, the Cordio stack is a superior solution for companies looking to develop Bluetooth low energy semiconductors while reducing time-to-market.

4
Arm Cordio-C50
The Arm Cordio-C50 is a Bluetooth 5 modem, a 802.15.4-2006 modem, protocol processing logic and link and MAC layer controller delivered as soft IP, with powerintent and implementation IP, associated test-benches and link layer and MAC firmware.

5
Arm Cordio-C50 radio IP
Arm Cordio-C50 radio IP is a complete self-contained radio sub-system supporting Bluetooth 5 and IEEE 802.15.4 protocols available at TSMC 55nm LP/ULP, TSMC 40nm LP/ULP, and UMC 55nm ULP process nodes. The solution consists of the RF 2.4GHz transceiver, modem, protocol processing logic and link and MAC controller along with link and MAC layer firmware.

6
Arm Cordio-E154
The Arm Cordio-E154 is an 802.15.4-2006 modem, protocol processing logic and MAC layer controller delivered as soft IP, with power intent and implementation IP, associated test-benches and MAC firmware.

7
Arm Cordio-E154 radio IP
The Arm Cordio-E154 radio IP is a complete self-contained radio subsystem supporting the IEEE 802.15.4 protocol available at TSMC 55nm LP/ULP, TSMC 40nm LP/ULP and UMC 55nm ULP process nodes. The solution consists of the RF 2.4GHz transceiver, modem, protocol processing logic and MAC controller along with MAC layer firmware.

8
Arm Kigen Sim Solutions
Arm Kigen provides a portfolio of Subscriber Identity Module (SIM) solutions built on the latest cellular standards and specifications.

9
Arm mbed cloud
The scalable solution for IoT device management challenges, built for you.

10
Bluetooth low energy Link Layer IP compliant with Bluetooth 5
Compliant with the latest Bluetooth low energy specification v4.2 with a roadmap to Bluetooth 5, Synopsys designWare Bluetooth Link Layer IP delivers low power wireless connectivity for Internet of Things (IoT) System-on-Chips (SoCs).

11
DesignWare Bluetooth Low Energy IP Solutions
Synopsys complete DesignWare Bluetooth Low Energy IP solution, compliant with Bluetooth 5 and Bluetooth mesh, consists of silicon-proven PHYs and Link Layer IP.

12
Highly powerful and scalable multi-mode communication processor for IoT wireless applications
This processor is optimized for IoT communication applications as well as UE terminals; delivers highly powerful vector capabilities alongside a general computation engine to supply the performance and flexibility demanded by various IoT communication applications.

13
Highly powerful, multi-mode communication processor for IoT wireless applications
It delivers highly powerful vector capabilities alongside a general computation engine to supply the performance and flexibility demanded by various IoT communication applications, while meeting the strict demands for power efficiency and low cost.

14
RivieraWaves Wi-Fi Platforms
The RivieraWaves Wi-Fi IP family offers a comprehensive suite of platforms for embedding Wi-Fi 802.11a/b/g/n/ac into SoCs/ASSPs. Optimised implementations are available targeting a broad range of connected devices, including smartphones, wearables, consumer electronics, smart home, industrial and automotive applications.

15
Ensigma GNSS IP
Designed specifically for mobile battery-operated devices, Ensigma GNSS IP solutions support GPS, GLONASS, BeiDou and Galileo GNSS and a range of SBAS, providing high performance without compromising battery life.

16
IoT Edge SoC Platform
An edge device in the IoT context is a secure, remotely manageable asset connected to the cloud

17
IoT Gateway SoC Platform
IoT Gateway is a critical component in an IoT system and it connects multiple and in many cases, heterogeneous edge devices to the cloud. Among its primary functions are, edge device connectivity, protocol translation, data filtering & analysis, security, device management etc.

18
LTE NB IoT/Cat M UE Low Power RF Transceiver IP
70xx is a range of ultra‐low power LTE Cat M/NB-IoT RF Transceiver IPs optimized for IoT and M2M applications.

19
CommSolid CSN130
CommSolid CSN130 is a complete ultra-low power baseband IP for cellular IoT consisting of hardware (RTL) and software stack.

20
ARASTU_ETH_10G - Ethernet 1G/10G Switch for low latency applications
Time critical applications, such as Trading Stock Exchange’s, Airport Terminals etc. require systems that deliver high throughput with low latency, as negligence even by a millisecond can prove ...

21
IcyTRX - Ultra low-power 2.4 GHz transceiver for Bluetooth Low Energy 5
The icyTRX ultra-low-power RF transceiver is designed to meet standards such as Bluetooth Low Energy (Bluetooth Smart), 802.15.4 PHY Layer (e.g. ZigBee), and proprietary standards with data-rates from 62.5 kBit/s up to 4 Mbit/s.

22
Palma Ceia WiFi Internet of Things (IoT) Solution
Complete silicon-proven IC product and IP solutions that can drop-in to your system or IC design and meet your time-to-market goals.

23
H.264 hardware encoder for ultra low power IoT application
H.264 High profile level 4.2 | Max resolution up to 2032x2032 | Max performance 1920x1088 30fps at 150Mhz (60fps at 300Mhz) | Macro block 16x16 / 8x8 / 4x4 all estimation | Intra prediction 0~8 all estimation | Wide motion search range (+-96, +-48) for moving camera | Quater pel motion estimation | CAVLC / CABAC VLC | Deblock filtering | Multi-slice encoding

24
UE LTE-M (Cat-M) / NB-IoT SAW-less TRX 400MHz~2.7GHz (no PA)
SaberTek s 4th generation LTE transceiver IP. Supporting 3GPP Rel. 14, it has the lowest power consumption and silicon area, enabling IoT wireless market. This transceiver IP requires minimum off-chip components enabling very low cost IoT solutions.

25
UE LTE-M (Cat-M) / NB-IoT SAW-less TRX 400MHz~2.7GHz (with integrated PA)
SaberTek s 4th generation LTE transceiver IP. Supporting 3GPP Rel.14, it has the lowest power consumption and silicon area, enabling IoT wireless market. This transceiver IP requires minimum off-chip components enabling very low cost IoT solutions.

26
Wi-Fi HaLow 802.11ah IP
Wi-Fi HaLow adapts the familiar Wi-Fi standard to a frequency and connection style that is ideally suited to the Internet of Everything.

27
WiFi 802.11 b/g/n Transceiver 2.4GHz+PA+Balun for IoT
SBR75xxIoT, is a fully integrated 1x1 transceiver IPs for 2.4GHz 802.11bgn applications. It includes the receiver, transmitter, Frac-N frequency synthesizer and LO chain, and all the supporting blocks such as bias.

28
Blue Gecko BGM121 Bluetooth Smart SiP Module
BGM121 Blue Gecko Bluetooth SIP Module has +8 dBm TX power and is targeted for applications where ultra-small size, reliable high performance RF, low-power consumption and easy application development are key requirements. At 6.5 x 6.5 x 1.4 mm the BGM121 module fits applications where size is a constraint.

29
EFR32 Mighty Gecko Mesh Networking Wireless SoCs for zigbee and Thread
The Mighty Gecko family of SoCs is ideal for designing energy-friendly wireless connected IoT devices. Part of the Wireless Gecko portfolio, the Mighty Gecko is the superset part and supports 2.4 GHz and Sub-GHz protocols, including zigbee, Thread, BLE, and Silicon Labs Connect stack for 2.4 GHz, as well as Sub-GHz for proprietary protocols and the Connect stack. The single-die solution provides industry-leading energy efficiency, ultra-fast wakeup times, a scalable power amplifier, and no-compromise MCU features. The devices are well suited for battery operated application as well as other systems requiring high performance and low energy consumption.

30
LoRa Geolocation for IoT
LoRa Geolocation is a GPS-free solution for low power wide area networks. As a major enhancement to the LoRa wireless RF platform, LoRa geolocation solution will enable a wide range of applications which require the determination of a location as part of the overall solution.

31
STM32L4 Discovery kit IoT node, low-power wireless, BLE, NFC, SubGHz, Wi-Fi
The B-L475E-IOT01A Discovery kit for IoT node allows users to develop applications with direct connection to cloud servers.

 Back

Partner with us

Visit our new Partnership Portal for more information.

Submit your material

Submit hot news, product or article.

List your Products

Suppliers, list and add your products for free.

More about D&R Privacy Policy

© 2018 Design And Reuse

All Rights Reserved.

No portion of this site may be copied, retransmitted,
reposted, duplicated or otherwise used without the
express written permission of Design And Reuse.