Find Top SoC Solutions
for AI, Automotive, IoT, Security, Audio & Video...
You are here : design-reuse-embedded.com  > Design Platform  > SoC Design Systems
Online Datasheet        Request More Info


The Kintex®-7 FPGA Connectivity Kit is a 20Gb/s platform for high-bandwidth and high-performance applications containing all the necessary hardware, software and IP to power quickly through your evaluation and development of connectivity systems. This includes a 20Gb/s targeted reference design featuring PCI Express, a DMA IP core from Northwest Logic, 10GBase-R, AXI, and a Virtual FIFO memory controller interfacing to an external DDR3 memory. To control and monitor this design, the kit includes a connectivity GUI built on Fedora Live OS which includes all the software drivers. Additionally, this kit contains the relevant SFP+ FMC daughter card, cable and transceiver modules needed to utilize this design. This kit is built using the KC705 base board as a foundation and, as such, enables all the functionality of the Kintex-7 FPGA KC705 Base Evaluation Kit as well as the Kintex-7 FPGA Embedded Kit. Kintex-7 FPGA Connectivity Kit Product Brief What s Included KC705 Evaluation Board featuring the XC7K325T-2FFG900CES FPGA Connectivity targeted reference design Featuring PCI Express, a DMA IP core from Northwest Logic, 10GBase-R, AXI, and a Virtual FIFO memory controller interfacing to an external DDR3 memory Control & monitor GUI, Fedora 16 Live OS DVD, required software drivers and source code FMC daughter card featuring ganged SFP cages supporting up to 4x SFP+ modules Two 10Gb Ethernet transceiver modules and a single fiber optic patch cable Full seat ISE® Design: Suite Embedded Edition Device-locked to the Kintex-7 325T FPGA Printed Getting Started Guide specifically tailored to the connectivity kit Contains all hardware and soft content also available in the KC705 base evaluation kit Hardware such as the USB flash drive, cables and power supply Soft content including all reference designs, demos, board design files and documents to quickly get started with evaluation


FPGA: Kintex-7 XC7K325T-2FFG900CES ROHS compliant KC705 kit including the XC7K325T-2FFG900CES FPGA Configuration Onboard JTAG configuration circuitry 512 Mb BPI FLASH for PCIe Configuration 16MB Quad SPI Flash Memory 1G DDR3 SODIMM 800MHz / 1600Mbps 128MB (1024Mb) Linear BPI Flash for PCIe Configuration 16MB (128Mb) Quad SPI Flash IIC 8Kb IIC EEPROM SD Card Slot Communication & Networking GigE Ethernet GMII, RGMII and SGMII SFP / SFP+ cage GTX port (TX, RX) with four SMA connectors UART To USB Bridge PCI Express x8 edge connector Display HDMI Video output External Phy/codec device driving an HDMI Connector 2x16 LCD display 8x LEDs Expansion Connectors FMC-HPC (Partial Population) connector (4 GTX Transceiver, 116 single-ended or 58 differential (34 LA & 24 HA) user defined signals) FMC-LPC connector (1 GTX Transceiver, 68 single-ended or 34 differential user defined signals) IIC Clocking 200MHz Oscillator (Differential) SMA Connectors for external clock (Differential) GTX Reference Clock port with 2 SMA connectors OBSAI/CPRI ? SFP+ Received clock EXT Config CLK Control & I/O 5X Push Buttons 4X DIP Switches Diff Pair I/O (1 SMA pair) AMS FAN Header (2 I/O) 7 I/O pins available through LCD header Power 12V wall adapter or ATX Voltage and Current measurement capability of 2.5V, 1.5V, and 1.2V, 1.0V supplies (IIC path to FPGA) Analog XADC header

Partner with us

Visit our new Partnership Portal for more information.

Submit your material

Submit hot news, product or article.

List your Products

Suppliers, list and add your products for free.

More about D&R Privacy Policy

© 2018 Design And Reuse

All Rights Reserved.

No portion of this site may be copied, retransmitted,
reposted, duplicated or otherwise used without the
express written permission of Design And Reuse.