Find Top SoC Solutions
for AI, Automotive, IoT, Security, Audio & Video...
You are here : design-reuse-embedded.com  > Automotive, Avionics and High safety  > CAN

Controller Area Network IP


The C_CAN FD8 is a CAN IP module that can be realized as a stand-alone device, as part of an ASIC or as a FPGA (Altera or Xilinx).

The C_CAN FD8 performs communication according to ISO 11898-1:2015 up to 8 byte payload. For the connection to the physical layer additional transceiver hardware is required.

For communication on a CAN network, individual Message Objects are configured. The Message Objects and Identifier Masks are stored in the Message RAM.

All functions concerning the handling of messages are implemented in the Message Handler. Those functions are the acceptance filtering, the transfer of messages between the CAN_Core and the Message RAM, and the handling of transmission requests as well as the generation of the module interrupt.

The register set of the C_CAN FD8 can be accessed directly by an external CPU via the module interface. These registers are used to control/configure the CAN_Core and the Message Handler and to access the Message RAM.

The C_CAN FD8 module is delivered with an example of the AMBA APB bus interface from ARM. For Altera FPGAs the Altera Avalon bus interface is provided.

They can easily be replaced by a user-defined module interface.

Partner with us


List your Products

Suppliers, list and add your products for free.

More about D&R Privacy Policy

© 2020 Design And Reuse

All Rights Reserved.

No portion of this site may be copied, retransmitted, reposted, duplicated or otherwise used without the express written permission of Design And Reuse.