Find Top SoC Solutions
for AI, Automotive, IoT, Security, Audio & Video...
You are here : design-reuse-embedded.com  > Automotive, Avionics and High safety  > Video for Automotive
Online Datasheet        Download Datasheet        Request More Info
All Silicon IP


The logiRECORDER Automotive Video Data Logger is a user-friendly, all-in-one automotive video and network data logger that sets the new standard for design and validation of vision-based Advanced Driver Assistance and Autonomous Driving (ADAS/AD) systems. It operates by tapping between the real vehicle’s camera installation and the Electronic Control Units (ECUs) to enable noninvasive and low-latency recording of camera video, and network sensory and ECU data.


Non-invasive test and validation of Advanced Driver Assistance and Autonomous Driving (ADAS/AD) systems in real traffic situations Recording of the real-world road conditions for use in the laboratory, i.e. in the HIL simulations Development of new ADAS/AD algorithms and systems

Block Diagram


  • Enables simultaneous recording of up to twelve(12) uncompressed video camera inputs and the data from various in-vehicle networks
  • Inserts between cameras and ECUs to ensure noninvasive low-latency video capture from the real vehicle s camera installation (As Is!)
  • Simulates the complete vehicle camera system by playing back the recordings in Hardware-in-the-Loop HIL tests on the developer s desk
  • The playback saves original video frame rates, resolutions and phase relations
  • The default video interface can be modified:
    • TI® FPD Link-III (DS 913/914 RX/TX); resolution 1280x800@30fps, YCbCr 4:2:2
    • aux HDMI input 1280x1024@60fps
  • Records automotive network data parallel to video : CAN, LIN, FlexRay, UART, DIG I/O, GP
  • Recordings are stored with a central timestamp
  • User-friendly PC application enables full control of the HW configuration, recording and playback
  • Can be configured for the self-standing operation in the test vehicle
  • Supports standard and event-triggered recording of video and data before and after the trigger
  • Triggers and filters can be setup as signals and messages from the vehicle databases
  • Currently supported vehicle databases: CAN XML DBC, LIN LDF, FlexRay FIBEX
  • Industry standard formats of the log files:
    • video in the YUY2 AVI format
    • networks data in ASC file format
  • External trigger IOs enable integration with third-party test equipment in the test vehicle
  • Enables control HDMI monitor output while recording and during the playback
  • Four(4) portable SSD Disks (FAT32, up to 8 TB combined) enable hours of recordings
  • The removable SSD SATA disks can be plugged in a PC for easy video and network data transfer
  • Rugged and actively cooled housing enables reliable test vehicle installations
  • Integrates separated video inputs and outputs to avoid constant re-cabling
  • Modular architecture based on the Xilinx® FPGA/SoC enables customizations
  • Documentation and tech support (e-mail)

Partner with us

Visit our new Partnership Portal for more information.

Submit your material

Submit hot news, product or article.

List your Products

Suppliers, list and add your products for free.

More about D&R Privacy Policy

© 2018 Design And Reuse

All Rights Reserved.

No portion of this site may be copied, retransmitted,
reposted, duplicated or otherwise used without the
express written permission of Design And Reuse.