www.design-reuse-embedded.com
Find Top SoC Solutions
for AI, Automotive, IoT, Security, Audio & Video...
You are here : design-reuse-embedded.com  > Design Platform  > Development Platform

SIP design for IoT using a Cortex M0 with BLE and Flash dies - Raptor SIP

Overview

Raptor SIP is an integrated system-in-package solution combining a customizable Cortex M0-based MCU based on the Raptor SoC design template with dies for low-energy Bluetooth and flash.


Raptor is targeted on the X-FAB XH018 process (180nm) and available analog IP library. Raptor provides a means to interface with analog and digital sensors needed for IoT applications. The BLE module is the EM9304 from EM Microelectronics. The flash is a 64kB (512kb) serial NOR from Macronix ( MX25U5121E ).


The reference design is based on an SoC design template and can be modified, compiled and simulated through the SoC Editor tool with CloudV on the Efabless platform. The reference design comes with basic device drivers for all on-chip peripherals as well as set of applications to test and demonstrate Raptor capabilities.


Instances of the Raptor Design Template can be configured through the Design Request Form. A configuration file is generated upon saving the form and can be used as a starting point for generating a reference design or to request a turn-key delivery of a custom SoC through design partners on the Efabless platform.


Below is the block diagram for a Demo Chip configuration taped-out for Raptor. The design files for project include an instance of Raptor based on the configuration shown below.

Partner with us

List your Products

Suppliers, list and add your products for free.

More about D&R Privacy Policy

© 2024 Design And Reuse

All Rights Reserved.

No portion of this site may be copied, retransmitted, reposted, duplicated or otherwise used without the express written permission of Design And Reuse.