www.design-reuse-embedded.com
138 "IoT Design Solutions" Solutions

1
ARC EV Processors are fully programmable and configurable IP cores that are optimized for embedded vision applications

DesignWare EV Embedded Vision Processors provide high-performance processing capabilities at a power and cost point low enough for embedded applications, while maintaining flexibility to support an...


2
Arm Artisan IoT POP IP
Arm IoT POP IP helps accelerate the implementation of IoT SoCs by offering physical IP as well as reference designs and know-how to develop a design that has optimal performance with minimum area.

3
Arm Cordio-B50
The Arm Cordio-B50 is a Bluetooth 5 modem, protocol processing logic and link layer controller delivered as soft IP, with power intent and implementation IP, associated testbenches and link layer firmware. Cordio-B50 supports changes enabled by the Bluetooth 5 radio including the 2 Mbps mode, Long range, and advertising extensions.

4
Arm Cordio-B50 radio IP
The Arm Cordio-B50 radio IP is a complete self-contained radio subsystem supporting Bluetooth 5 protocol available at TSMC 55nm LP/ULP, TSMC 40nm LP/ULP and UMC 55nm ULP process nodes. The solution consists of the RF 2.4GHz transceiver, modem, protocol processing logic and link controller along with link layer firmware.

5
Arm Cordio-B50 stack
The Arm Cordio stack is designed specifically for Bluetooth low energy single-mode products catering to the power sensitive Internet of Things (IoT) market. With its small code size, easy-to-use APIs, and portable architecture, the Cordio stack is a superior solution for companies looking to develop Bluetooth low energy semiconductors while reducing time-to-market.

6
Arm CoreLink SSE - 200 subsystem
The CoreLink SSE-200 subsystem is the foundation on which SoC designers will build a new generation of secure IoT products.

7
Arm Cortex - M23 and Cortex - M33
Arm Cortex-M23 and Cortex-M33, the first in a new family of Arm v8-M based processors, bringing proven Arm TrustZone technology to secure even the smallest of embedded devices. Licensed by the majority of the top 10 global MCU suppliers and backed by the world s No. 1 embedded ecosystem.

8
Arm mbed cloud
The scalable solution for IoT device management challenges, built for you.

9
Arm Platform Security Architecture (PSA)
The Platform Security Architecture (PSA) is a holistic set of threat models, security analyses, hardware and firmware architecture specifications, and an open source firmware reference implementation.

10
Bluetooth 5 controller for secure connectivity with low-power consumption for extended battery life

Synopsys' DesignWare® Controller IP for Bluetooth low energy, Thread, and Zigbee delivers secure, concurrent wireless connectivity for Internet of Things (IoT) applications such as wearable...


11
Bluetooth, Thread, and Zigbee controller for secure and concurrent wireless connectivity with low-power consumption

Synopsys' DesignWare® Controller IP for Bluetooth low energy, Thread, and Zigbee delivers secure, concurrent wireless connectivity for Internet of Things (IoT) applications such as wearable...


12
CEVA SenslinQ - Hardware and software platform for contextually aware IoT devices
SenslinQ is a unique hardware and software platform for linking various sensor processing elements and present them to the Host processor OS or user application.

13
CEVA SensPro - Industrys First High Performance Sensor Hub DSP Architecture
SensProTM is the industry's first high performance sensor hub DSP for processing and fusing data from multiple sensors including camera, Radar, LiDar, Time-of-Flight, microphones and inertial measurement units.

14
CEVA-Dragonfly NB2 Full eNB-IoT IP solution
CEVA has designed a complete eNB-IoT IP solution that can serve a wide range of applications. The CEVA-Dragonfly NB2 pre-integrates together a CEVA-X1 processor, an optimized RF Transceiver, baseband, and a protocol stack to offer a complete Release 14 Cat-NB2 modem IP solution that reduces time-to-market and lowers entry barriers

15
CEVA-X1 Multi-purpose IoT Processor
The CEVA-X1 is a multi-purpose combined DSP and control processor aimed at multi-mode IoT hub devices for handling cellular, LPWA, short range communication, positioning, always-on sensor-fusion, and speech processing concurrently.

16
CEVA-XC12 Multi-gigabit SDR Processor
The CEVA-XC12 is the first DSP architecture that offers the raw performance and power efficiency required for multi-gigabit class modems. This flexible architecture with multiple options enables it to be customized, configured, and scaled to address applications such as smartphones and other terminals, advanced and centralized access points, small cells, macro cells and cloud RAN (C-RAN).

17
CEVA-XC4500 Vector processor
The CEVA-XC4500 DSP vector processor is the fourth generation of the widely licensed CEVA-XC architecture. Optimized for advanced communication applications, and especially high-performance wireless infrastructure equipment, it features a combination of VLIW and vector engines that enhance typical DSP capabilities with advanced scalar and floating-point vector processing.

18
CEVA-XC5 Communication Processor
Based upon the industry�s most widely adopted CEVA-XC323 Vector DSP architecture, the CEVA-XC5 DSP vector processor offers the performance, area savings, and power efficiency that system designers demand when implementing a broad range of IoT and M2M communication standards.

19
Compact, ultra-low power ARC EM processors and ASIL-Ready ARC EM Safety Island IP feature excellent code density

The DesignWare® ARC® EM Family of embedded processors is based on the scalable ARCv2 Instruction Set Architecture (ISA) and is optimized for energy and performance efficiency (DMIPS/mW and ...


20
Content Protection (HDCP) 2.2/2.3 embedded security modules (ESMs) for HDMI, DisplayPort, and USB 3.x Type-C interfaces

Synopsys offers highly integrated and proven security solutions spanning silicon cores to embedded software to help content owners, service providers, network operators, embedded system OEMs and So...


21
CoreLink CMN-600 Coherent Mesh Network for IoT
This is a scalable, high performance interconnect that has been optimized and validated with the latest Arm v8-A processors.

22
CoreLink S I E - 200
CoreLink SIE-200 provides IP blocks built on top of the AMBA 5 AHB5 interface that extends TrustZone security to the system. The interconnect and TrustZone controllers provide a hardware-enforced isolation between secure and non-secure applications.

23
Cortex-M23 Processor
The Arm Cortex-M23 introduces the latest generation of the Arm Cortex-M product family. Based on the Armv8-M baseline architecture, it is the smallest and most energy efficient Arm processor with Arm TrustZone security technology. The Cortex-M23 is the ideal processor for constrained embedded applications requiring efficient security.

24
Cortex-M33 Processor
The Arm Cortex-M33 is the most configurable of all Cortex-M processors. It is a full featured microcontroller class processor based on the latest Arm v8-M architecture with Arm TrustZone security and digital signal processing.

25
Cryptography IP solutions, Public Key Accelerators (PKAs) and True Random Number Generators (TRNGs)

Synopsys offers a broad portfolio of silicon-proven DesignWare® Cryptography IP solutions that includes symmetric and hash cryptographic engines, Public Key Accelerators (PKAs) and True Random ...


26
Display unit and graphics accelerator for IoT and wearables
Vector graphics | Fill/Clear | BLT | Blend | Scale | Any Angle Rotation | Perspective Transformation | Programmable Shader | ARGB8, RGB565, A8 and other optional formats | Color Conversion | On-the-fly compression

27
eSecure module for SoC security for IoT
Secure Boot | Firmware update in the field | Secure key storage | Cryptography algorithms off-loading

28
FT 6050 Smart Transceiver SoC
The FT 6050 Smart Transceiver SoC is a key product in Adesto's embedded IoT platform – the most comprehensive and open control networking platform for the Industrial IoT.

29
GC Nano Ultra-MCU/MPU OpenGL ES 2.0 GPU for Wearables and IoT
GCNano is a complete OpenGL ES 2.0 GPU architected for MCU / MPU systems with limited power, memory, and bandwidth configurations.

30
GCNano Ultra 3-MCU/MPU OpenGL ES 3.0 GPU for Wearables and IoT
OpenGL ES 3.0/2.0 / 1.1 | OpenVG 1.1 | 720p @ > 60FPS (UI Resolution and Performance) | Up to 400M Pixels/sec | Up to 40M Triangles/sec | Up to 200M Vertices/sec | 1.6 mm2 (28nm)

31
GCNano-MCU/MPU OpenGL ES 2.0 GPU for Wearables and IoT
This is a complete OpenGL ES 2.0 GPU architected for MCU / MPU systems with limited power, memory, and bandwidth configurations.

32
High-performance ARC HS3x and HS4x processors are optimized for GHz+ operating speeds with minimum area and power consumption

The DesignWare® ARC® HS family of 32-bit processors is based on the scalable ARCv2 Instruction Set Architecture (ISA) and is optimized to deliver maximum performance efficiency (DMIPS/mW an...


33
i.MX6 based IoT Gateway Reference Board
IOT gateway reference solution enables companies to seamlessly connect industrial infrastructure devices and secure data flow between devices and the cloud. With i.mx6 processor, it offers comprehensive security features include cryptographic accelerators, high-assurance boot and tamper protection. It is equipped with standard communication and wirelesss interfaces like WiFi, Bluetooth, Zigbee (optional)

34
i.MX6 based Tablet design
The i.MX6 MPB (Multi-Purpose Board) Reference Design comprises hardware and software components that provide an Customizable Cost Effective integrated platform for building Tablet, Set-top box, IOT gateway, Auto infotainment etc.

35
I3C Sensor Subsystem
The I3C Sensor Subsystem is an AMBA® based system that is useful in building low power SOCs needing sensor interfaces through I3C.

36
IoT Subsystem for Cortex-M
Arm s IoT subsystem for Cortex-M processors with mbed OS is a complete reference system that reduces the complexity and risk of an SoC design for IoT endpoints.

37
IoT Subsystem for Cortex-M
Arm s IoT subsystem for Cortex-M processors with mbed OS is a complete reference system that reduces the complexity and risk of an SoC design for IoT endpoints.

38
IoT Subsystem with AXI Multi-layer AHB Multi-matrix Bus System
Arm IoT subsystem for Cortex-M processors with mbed OS is a complete reference system that reduces the complexity and risk of an SoC design for IoT endpoints.

39
IPsec Engine
On OSI layer 3 (network layer), IPsec is the transport security protocol of choice. The BA454 is a very scalable engine implementing the IPsec standard for high throughput applications.

40
Kigen SIM solutions
The Arm Kigen product family provides a portfolio of Subscriber Identity Module (SIM) solutions built on the latest cellular standards and specifications. These solutions are applicable to 2G/3G/4G networks, as well as IoT-Focused networks such as NB-IoT/LTE-M and future 5G networks.

 | 
 Previous Page
 | 1 | 2 | 3 | 4 | 
Next Page 
 | 
 Back

Partner with us

Visit our new Partnership Portal for more information.

List your Products

Suppliers, list and add your products for free.

More about D&R Privacy Policy

© 2020 Design And Reuse

All Rights Reserved.

No portion of this site may be copied, retransmitted, reposted, duplicated or otherwise used without the express written permission of Design And Reuse.